How To Choose Tires? Guide for choosing TBR Tyre

July 09, 2024

Choosing the right TBR tyre for your specific rig comes down to weather conditions, tyre size and performance criteria. This guide will help you make an informed decision.

How to Choose the Best Tyres for Your Truck

Truck tire tread designs are created to address a variety of needs and applications. The tire tread design helps enable the tire to provide good service under a variety of conditions. It’s important to prioritize tire needs based on your requirements. Here is a list of common tire needs:

• Good Dirt and Mud Traction

• Long, High-speed Run Application

• Good Dry Traction

• Long, Intermediate On-off Road Application

• Good Snow Traction

• Short, Intermediate On-off Road Application

• Good Steering Response

• Long Tread Wear

• Good Wet Traction

• Reduced Noise Generation

• High Fuel Economy

• Resistance to Cutting/Chipping

• Low Rolling Resistance

• Resistance to Irregular Wear

• Resistance to Penetration

• Resistance to Stone Retention

• Resistance to Rib Tears and Curbing

• Smartway Verification

You will most likely choose several combinations of tire needs for your particular usage. One consideration is prioritizing the needs from high to low. This will help you further narrow your tire selection. For example, if your fleet prioritizes maximizing fuel economy, a tire design with shallower tread depth and less aggressive tread design could help reduce traction and overall mileage.

TBR tyres provide better heat dissipation, less risk of tire damage and extended tire life. Radial tires also provide better stability at high speeds and improved resistance to hydroplaning. Bias tires are preferred for their durability and load-carrying capacity. They are commonly used in heavy-duty applications and off-road conditions. Bias-ply tires can withstand rough terrains and have better resistance to cuts and punctures.

Factors to consider when choosing TBR Tyres

1.Load Capacity

Evaluate the TBR tyre load-carrying capacity to ensure it meets the requirements of your trucking needs. Consider the maximum load rating, load index, and ply rating of the tires. Ensuring the tires can handle the anticipated loads is essential for safe and efficient operation.

2. Traction and Grip

Assess the TBR tyre ability to maintain traction and provide adequate grip on different road surfaces and conditions. Consider the TBR tyretread pattern, tread depth, and the type of rubber compound used. Tires with deeper and more aggressive tread patterns usually offer better traction, especially in off-road or challenging conditions.

3.Fuel Efficiency

Evaluate the TBR tyre rolling resistance, as it directly affects fuel consumption. Tires with lower rolling resistance can contribute to improved fuel efficiency and reduced operating costs. Look for tires with fuel-efficient design features and technologies, such as low rolling resistance compounds or optimized tread patterns.

4. Handling and Stability

Assess the TBR tyre handling characteristics and stability during various driving maneuvers. Consider factors such as sidewall stiffness, tread flexibility, and overall tire design. TBR tyre with good handling and stability characteristics provide better control, responsiveness, and stability on the road.

5. Noise and Comfort

Evaluate the TBR tyre noise levels and its impact on driver comfort. Look for tires designed to reduce road noise, as excessive noise can be fatiguing for drivers during long hauls. TBR tyre with advanced noise reduction technologies or optimized tread patterns can help enhance comfort.

4 Top Tips For Your Final TBR Tyre Selection 

Tyre needs, service applications and tread design choices can be confusing and overwhelming. You want to ensure your fleet of trucks is well-equipped to handle whatever operation you assign them to. We’ve put together the top five tips to keep in mind.

    1. Prioritize your operational needs by order of importance

    2. Compare your needs against your type of service application to further narrow your selections.

    3. Choose the appropriate tire tread design based on needs and service application.

    4. Approve your selection with dealer exports.

Hanksugi is a best tyre manufacturer, whose TBR tyres is a pioneer of saving fuel. We use environmental friendly raw materials, innovative products design and advanced technology. The whole process produces less emission, little dusk, low noise and consumes less energy.  The products are nontoxic, safe, fuel-saving, low noise, anti-slip, can be retreaded, and comply with EU REACH standards. Hanksugi tyres have better performance of low rolling resistance, thus decreasing energy consumption, saving fuel and lowering exhaust emissions. Hanksugi tyres can save 5% fuel consumption on average.

Hanksugi Tire can assemble tyres as customers' requirements, which offers a great advantage to our customers in freight cost. We will dispatch technician to visit customers and to solve quality problems. Also, our managers will keep in touch with the clients to get feedback in time to improve the products.

Basic Information
  • Year Established
  • Business Type
  • Country / Region
  • Main Industry
  • Main Products
  • Enterprise Legal Person
  • Total Employees
  • Annual Output Value
  • Export Market
  • Cooperated Customers
Chat with Us

Send your inquiry

Choose a different language
bahasa Indonesia
Tiếng Việt
Current language:English